3c3
< <title>EAGLE Help Version 5.2.0</title>
---
> <title>EAGLE Help Version 5.3.0</title>
8c8
< <td align=left>EAGLE Help Version 5.2.0</td>
---
> <td align=left>EAGLE Help Version 5.3.0</td>
489d488
< <tr><td>                         </td><td width=20><td><a href=#92>SET</a> SNAP_BENDED OFF | ON;</td></tr>
1555c1554,1555
< <mb>Right</mb> rotates the part.
---
> <mb>Right</mb> rotates the part.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
1898c1898
< contain any characters and must be enclosed in quotes.
---
> contain any characters and must be enclosed in single quotes.
2004c2004,2005
< <tt>AUTO &#149;..;</tt>
---
> <tt>AUTO &#149;..;</tt><br>
> <tt>AUTO LOAD|SAVE filename;</tt>
2018a2020,2023
> <p>
> The <tt>LOAD</tt> and <tt>SAVE</tt> options can be used to load the Autorouter parameters
> from or save them to the given file. If <i>filename</i> doesn't have the extension
> <tt>".ctl"</tt> it will be appended automatically.
2104,2106c2109
< (<a href=#344>Light edition</a>: 100x80mm),
< where the outlines are placed in such a way that the board is centered
< between the 50mil grid.
---
> (<a href=#344>Light edition</a>: 100x80mm).
2518c2521,2522
< <mb>Right</mb> rotates the selected object or the group.
---
> <mb>Right</mb> rotates the selected object or the group.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
3658c3662,3663
< <mb>Right</mb> rotates the gate.
---
> <mb>Right</mb> rotates the gate.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
3731c3736,3737
< <mb>Right</mb> rotates the label.
---
> <mb>Right</mb> rotates the label.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
4246c4252,4253
< <mb>Right</mb> rotates the selected object or the group.
---
> <mb>Right</mb> rotates the selected object or the group.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
4635c4642,4643
< <mb>Right</mb> rotates the pad.
---
> <mb>Right</mb> rotates the pad.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
4745c4753
< <tt>PASTE &#149;</tt>
---
> <tt>PASTE [ orientation ] &#149;</tt>
4750c4758,4759
< <mb>Right</mb> rotates the contents of the paste buffer.
---
> <mb>Right</mb> rotates the contents of the paste buffer.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
4754a4764,4765
> See the <a href=#29>ADD</a> command for an explanation of Orientation.
> <p>
4792c4803,4804
< <mb>Right</mb> rotates the pin.
---
> <mb>Right</mb> rotates the pin.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
5809a5822
> <mb>Shift+Left</mb> starts routing with the same width as an existing wire.<br>
5879c5892
< <h2>Selecting the routing layer</h2>
---
> <h2>Selecting the routing layer and wire width</h2>
5885a5899,5901
> When routing an airwire that starts at an already routed wire, the new
> wire's width is automatically adjusted to that of the existing wire
> if the <tt>Shift</tt> key is pressed when selecting the airwire.
5887,5889c5903,5908
< If an airwire is routed very close to the end point the last wire
< is placed automatically. The minimum distance for this snap function
< can be defined with the command
---
> The end point of the dynamically calculated airwire is always used as an
> additional snap point, even if it is off grid. If the remaining airwire has
> a length that is shorter than SNAP_LENGTH, the routed wire automatically
> snaps to the airwire's end point, and stays there until the mouse pointer
> is moved at least SNAP_LENGTH away from that point.
> The minimum distance for this snap function can be defined with the command
5894,5903d5912
< If "number" is 0 the snap function is disabled.
< <h2>Wire Angle</h2>
< If you route airwires connected to pads which are not positioned at
< a grid point, this might not be possible with 45-degree angles. In
< this case the command
< <pre>
< SET SNAP_BENDED OFF;
< </pre>
< can be executed so that this pad can be connected, even if the parameter
< Wire_Bend is set to 1 or 3.
6011c6020
< <tr><td>Snap function </td><td width=20><td><tt>SET SNAP_LENGTH number;</tt></td></tr>
---
> <tr><td>Snap function            </td><td width=20><td><tt>SET SNAP_LENGTH number;</tt></td></tr>
6014,6016c6023
< <tr><td>                         </td><td width=20><td>If tracks are being laid with the <a href=#89>ROUTE</a> command to pads that are not on the grid, the snap function will ensure that a route will be laid to the pad within the snap-length. </td></tr>
< <tr><td>                         </td><td width=20><td><tt>SET SNAP_BENDED OFF | ON;</tt></td></tr>
< <tr><td>                         </td><td width=20><td>If set <i>on</i> then the bend in the routed track will be on the grid in  <i>wire_bends</i> 1 and 3.</td></tr>
---
> <tr><td>                         </td><td width=20><td>If tracks are being laid with the <a href=#89>ROUTE</a> command to pads that are not on the grid, the snap function will ensure that a route will be laid to the pad within the snap-length.</td></tr>
6244a6252,6257
> <dt><b>Option.RepositionMouseCursorAfterContextMenu</b>
> <dd>
> Normally EAGLE doesn't automatically position the mouse cursor. However,
> some users want the cursor to be repositioned to the point where it has been
> before a context menu in the drawing editor was opened. Set this parameter to
> '1' to get this functionality.
6445c6458,6459
< <mb>Right</mb> rotates the smd.
---
> <mb>Right</mb> rotates the smd.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
6602c6616
< If a name shall begin with <tt>'-'</tt>, it has to be enclosed in quotes.
---
> If a name shall begin with <tt>'-'</tt>, it has to be enclosed in single quotes.
6608c6622,6625
< The special "empty" technology can be entered as two quotes (<tt>''</tt>, an empty string).
---
> The special "empty" technology can be entered as two single quotes (<tt>''</tt>, an empty string).
> <p>
> Note that the Technologies dialog contains all technologies from all devices in
> the loaded library, with the ones referenced by the current device checked.
6640c6657,6658
< <mb>Right</mb> rotates the text.
---
> <mb>Right</mb> rotates the text.<br>
> <mb>Shift+Right</mb> reverses the direction of rotating.
11094c11112
< if (smd.flags &amp; PAD_FLAG_STOP) {
---
> if (smd.flags &amp; SMD_FLAG_STOP) {
14939c14957,14958
< If <tt>Text</tt> contains an <tt>'&amp;'</tt>, the character following the ampersand
---
> If <tt>Text</tt> contains an <tt>'&amp;'</tt>, and the object following the label
> can have the keyboard focus, the character following the ampersand
